Fidument Tools · Beta version

How to compare DXF and STEP before laser cutting

Compare the outline and holes of a 2D DXF drawing with a flat STEP model. Inspect differences on an overlay and download a PDF or CSV report.

A flat cutting drawing and a 3D model can come from different revisions. A hole can be missing from one file even when the outer profiles agree.

How to use this tool

  1. Prepare both exports from the same revision

    In OPCAD, export the selected part as a 1:1 laser-cutting DXF and the same single solid as STEP. In the Sheet-metal creator, specify thickness and download 2D DXF and STEP from the same finished project.

  2. Sign in and choose which geometry to check

    Add both files. For the Sheet-metal creator, enter GEOMETRY as the DXF layer. Select the STEP plane, usually XY for a part drawn in XY, and the alignment and tolerance required for the check.

  3. Inspect the overlay and download the report

    Run the comparison and review messages, hole counts and highlighted differences. Download PDF for review or CSV for further checking. Compare the filenames and settings with the export.

Export settings for OPCAD and the Sheet-metal creator

In OPCAD, choose the laser-cutting DXF and a STEP of the individual part. Verify that both exports include the same openings and come from the same revision. In the Sheet-metal creator, select 2D DXF with the GEOMETRY layer and STEP with positive thickness.

If the files have different origins or orientations, explicitly set an offset or a quarter turn. When both exports use the same coordinate system, start with origin-based alignment.

Results and privacy

The check requires signing in and sending both files to the Fidument service. Download the PDF and CSV from the result in the app. The preview shows the outline and holes, and filenames in the report can identify a project or client. Check the report before sharing it.

Who is it for?

  • Laser cutting shops and people reviewing CAD deliverables
  • Designers of flanges, base plates and other flat parts

Input

  • One .dxf with cutting contours and one .step or .stp of the same revision, each up to 8 MiB.
  • A Fidument account. When the DXF has no declared unit, provide the unit from the source documentation.

Output

  • PDF with the overlay, result, diagnostics and comparison settings.
  • CSV with measurements, diagnostics and SHA‑256 digests of both inputs.

Capabilities

  • Compare units, the outline and through holes, and read thickness from STEP.
  • Overlay DXF and STEP and highlight areas present in only one file.
  • Choose DXF layers, the STEP plane and explicit alignment. The default tolerance is 0.05 mm, with a range of 0.01–1 mm.

Limitations

  • Text DXF must contain one closed outer outline in model space. Supported contours use lines, arcs, circles and zero-width lightweight polylines.
  • The STEP file needs one flat solid of constant thickness. Assemblies, bends, blind pockets, counterbores and bevels are outside scope.
  • Open contours, duplicates and unsupported entities on selected layers block the check. A result near the tolerance threshold may be reported as inconclusive.
  • Before cutting, the shop checks material, required thickness, manufacturing tolerances and machine settings.

Example use

A 140 × 140 × 8 mm test plate has four Ø11 mm holes. Matching exports show a shared outline and four holes. If the DXF lacks a hole, the report shows a difference even when the outer outlines agree.

Questions and answers

What if the DXF contains dimensions and notes?

Enter the exact cutting layer name. The Sheet-metal creator exports cut contours on GEOMETRY and text on DIMENSIONS. The selected layer limits the check and is recorded in the report.

Can I compare an inch DXF with a millimetre STEP?

Yes. Supported units are converted to millimetres. When the DXF has no declared unit, use the original export settings or the part documentation to choose it.

What data does the report contain?

It includes source filenames and SHA‑256 digests, comparison settings and results. The PDF also shows part geometry. Share the files with people authorised to receive the part documentation.

Related tools

OPCAD

OPCAD is a Windows CAD application. Model sheet parts and profiles, assemble structures and prepare their documentation.

Sheet-metal creator

Create flat plates, flanges and baseplates with holes. Click an outline or hole to edit its dimensions or placement and see live 2D/3D previews. Download DXF, STEP, STL, PDF or SVG.

DXF to PDF and SVG

Open a 2D DXF drawing, choose layers, units and scale, then download vector PDF or SVG. Beta version; check access and export conditions in your account before execution.

DXF–STEP preflight for cutting

Check access and export conditions in the app. A product description does not grant access.